Home / Disasters and Accidents / FAA Router Glitch Halts Flights Nationwide

FAA Router Glitch Halts Flights Nationwide

Summary

  • A single router misconfiguration caused a 5-hour nationwide ground stop.
  • The FAA has temporarily paused its router installation project.
  • Investigation into the cause of the router malfunction is ongoing.

A router misconfiguration triggered a rare, nearly five-hour nationwide ground stop across U.S. airports last Friday, resulting in 12,462 flight cancellations. The Federal Aviation Administration (FAA) has temporarily suspended the installation of new Hewlett Packard Enterprise (HPE) Juniper routers involved in the incident. This decision came after Democratic lawmakers urged an immediate pause on the deployment.

The disruption occurred when a Juniper router, part of an upgrade replacing older Cisco devices, began broadcasting data at an excessive rate, overloading the FAA's telecommunications infrastructure. This instability affected aircraft communications and radar feeds across multiple Air Route Traffic Control Centers and Terminal Radar Approach Controls.

The FAA, along with contractor L3Harris, Cisco, HPE, and the FBI, is examining the faulty router. U.S. Transportation Secretary Sean Duffy stated that while the incident has been recreated, the root cause is not yet clear, and no evidence of a cyberattack has been found.

Despite the recent disruption, Secretary Duffy defended the ongoing migration to modern IT systems, emphasizing the safety risks associated with outdated infrastructure. He is seeking further funding from Congress to complete the air traffic control system overhaul.

Disclaimer: This story has been auto-aggregated and auto-summarised by a computer program. This story has not been edited or created by the Feedzop team.

Read more news on

Property Code: 5571